Nortel Networks 1000M warranty Positioning and leveling the system, Adding spacers to columns

Installing earthquake bracing Page 357 of 456

Figure 123

Adding spacers to columns

(end column)

Spacers Spacers

Attach spacers to one side of each column (except the end column)

553-5383

7Go to “Positioning and leveling the system” on page 357.

End of Procedure

Positioning and leveling the system

The following tools are required to position and level the system:

•socket wrench (anchor bolts)

—28 mm (1 1/8 in.) for Kit A

—24 mm (15/16 in.) for Kit B

•16 mm (5/8 in.) socket wrench (pedestal bolts)

Procedure 68

Leveling the system

1Loosen the anchor bolts until the mounting plates are free to move.

2Starting from one end of the line-up, move a column into position.

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning