Nortel Networks 1000M Standalone Signaling Server NRS, NRS type co-resident Signaling Server

Page 432 of 456 Installing a Signaling Server

Figure 178

Standalone Signaling Server - NRS

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

Please select the Network Routing Service (NRS) configuration for this Signaling Server.

Please enter:

<CR> -> <a> -		H.323	Gatekeeper and SIP Redirect/Proxy Server.
<b>	-	H.323	Gatekeeper only.
<c>	-	SIP Redirect/Proxy Server only.
Enter		Choice>

Figure 179

NRS type — co-resident Signaling Server

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

Please select the type of Network Routing Service (NRS) for this Signaling Server.

Please enter:

<CR> -> <a> - Primary. <b> - Alternate. <c> - Failsafe.

Enter Choice>

9Select the type of NRS to be provided by this Signaling Server. See Figure 179 for a co-resident Signaling Server. See Figure 178 for a stand-alone Signaling Server.

•If this Signaling Server is to be the Primary NRS, enter a.

•If this Signaling Server is to be the Alternate NRS, enter b.

•If this Signaling Server is not a stand-alone Signaling Server and is to be the Fail-safe NRS, enter c.

Refer to IP Peer Networking: Installation and Commissioning (NN43001-313)for more information on the NRS.

NN43021-310 Standard 02.01 December 2007