| – Alarm display – |
⬛Alarm display : Alarm messages are displayed as shown below, when an operation error has occurred or when the unit is in a poor condition for operation. E.g., dirty head.
|
| 3 2 K C H – 1 / 2 |
|
| 0 m i n | |||
A |
|
|
|
|
|
| ||
|
| H E A D C L E A N I N G R E Q U I R E D ! |
| |||||
|
| |||||||
B |
|
|
|
|
|
| ||
|
|
| I N V A L I D | T A P E ! |
| |||
|
|
| ||||||
|
| 1 0 / 1 0 / 0 2 |
| S T A N D B Y - O F F | ||||
|
| 1 2 : 0 0 : 0 0 | T C R | 0 2 : 0 0 : 0 0 : 0 0 |
| |||
|
|
|
|
|
|
|
|
|
⬛Display at position A : Displays which show the state of the unit continues to be displayed here until the conditions are rectified.
Display | Contents |
|
|
LOW VOLTAGE | The voltage of the DC input power is low. Continued operation will bring the unit to the |
| POWER OFF mode. |
| Displayed irrespective of the DISPLAY mode setting. |
|
|
HEAD CLEANING | The video head is dirty. Please clean it with the dedicated |
REQUIRED! | (☞ Page 8) |
| If the head is clogged, it will be detected in the PLAYBACK mode and displayed. |
| When the unit enters the STOP mode or the cassette is ejected, the display goes off. |
| Displayed irrespective of the DISPLAY mode setting. |
|
|
NO DV SIGNAL | Despite DV connection, signals are not received. |
| Displayed when DISPLAY mode is set to ON/AUTO. |
|
|
⬛Display at position B : Messages indicating operation errors are displayed for about 3 sec- onds.
They are displayed when the DISPLAY mode is ON or AUTO.
Display | Contents |
INVALID TAPE! | Data tapes for PC use or DVC PRO tapes has been inserted. |
| The cassette will be ejected. |
|
|
LP TAPE! | The user attempts to play back a tape recorded in the LP mode. |
| This unit cannot record or play in the LP mode. |
DV NOT CONNECT
DV connection is not done.
