%$ ^
POWER |
|
|
|
|
|
|
|
|
|
|
|
| EJECT |
|
|
|
|
|
| MENU |
|
| A.DUB |
| REC | PLAY | PAUSE |
|
|
| DVCAM NTSC | PAL REC INH. |
|
|
|
|
|
|
| ||
|
|
| 1 / 3 |
|
| SET |
MIC | REMOTE | INPUT | CH | REW |
| FF |
| OFF | LINE | 2 / 4 |
| STOP |
|
|
|
| AUDIO |
|
|
|
| 9PIN WIRELESS | DV |
|
|
|
|
$ Indicator | % Audio indicator |
:When a cassette is loaded, the LED lights up green. (Likewise when the unit is in the POWER OFF state.)
When a cassette is being loaded or ejected, the LED blinks.
DVCAM : When the unit plays back a tape re- corded in the DVCAM format, the LED lights up green.
NTSC : The LED lights up green in the follow- ing cases:
•In the composite video or
•A tape recorded with NTSC signals is played back.
•When NTSC system DV signals are input while the INPUT switch is set at “DV”.
PAL : The LED lights up green in the follow- ing cases:
•In the composite video or
•A tape recorded with PAL signals is played back.
•When PAL system DV signals are in- put while the INPUT switch is set at “DV”.
REC INH : The LED lights up red in the following cases:
•When a cassette with its rear switch set at the SAVE position is inserted.
•When A.DUB is not possible such as on tapes recorded in 48kHz mode. (Approx. 3 sec)
This is an indicator for determining the pres- ence of audio signals (CH audio selected via the AUDIO OUT SEL item of the AUDIO/VIDEO menu).
^Sensor for wireless remote controller
When using the provided wireless remote con- troller, please point it to this sensor.
(☞ Page 25, “Using the wireless remote con-
troller”)
