Daily maintenance and regular inspection
This unit uses consumables or components that will wear off. If a
Please perform regular maintenance of the components as shown below.
Regular inspection (maintenance)
The tasks of maintenance involved are similar to that of replacing the engine oil or tire of a car. Depending on the number of usage hours, please clean, inspect or replace the components as follows:
Number of hours | 500H | 1000H | 1500H | 2000H | 4000H |
|
|
|
|
|
|
Drum assembly (including head) | |||||
|
|
|
|
|
|
Head cleaner | |||||
|
|
|
|
|
|
Tape guide, roller | |||||
|
|
|
|
|
|
Reel disk, tension bands | — | — | |||
|
|
|
|
|
|
—: Inspection
: Cleaning, inspection and adjustment
: Cleaning and inspection; Replacement if necessary
: Replacement
Maintenance necessity and fre- quency depends on the environ- ment and usage. The above infor- mation serves only as a guide.
Usage Time | : You can check the drum usage time via the hour meter display. |
| For details, please refer to page 65, “Checking the hour meter”. |
Maintenance consultation | : For details on the maintenance plan and fee, please consult with your |
| nearest |
Head cleaning
●Recording or playing back with a stained head will result in block noise or disrupted sound. Please perform regular head cleaning to main- tain superior image and sound quality.
●If dust adheres on the head, “HEAD CLEANING REQUIRED!” will be displayed on the monitor when this unit plays a tape.
Block noise
●For information on how to use the head cleaning tape and the relevant precautions, please refer to page 8, “Precautions on the use of cleaning tape”.
HEAD CLEANING REQUIRED!
