NAMES AND FUNCTIONS OF VARIOUS PARTS – Rear panel –
WARNING : SHOCK HAZARD - DO NOT OPEN. |
|
|
|
| |||
AVIS :RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR. |
|
|
|
| |||
DV IN/OUT |
|
|
|
|
|
| |
AUDIO |
| VIDEO |
|
|
|
| |
|
|
| I |
|
|
|
|
|
|
| N |
|
|
|
|
|
|
| 9PIN REMOTE |
|
| DC | 12V |
|
|
| O | AUX | NTSC | PAL | 1 |
|
|
|
|
| |||
|
|
| U |
|
|
| |
|
|
| T |
|
|
|
|
CH 1/3 | CH 2/4 | LINE | S |
|
|
|
|
|
|
| 4 | 3 | 2 |
| |
1DC power input terminal (2P)
This is used for DC12V input. It connects the DC mains cable of the provided AC adapter.
3AUX
Terminal used for adjustments at the factory.
Not for customer use.
Memo
●When power is supplied to this terminal, the POWER indicator located at the front panel lights up. (The LED lights up red when the POWER indicator is OFF.)
●Setting this unit to POWER ON, POWER OFF or PLAY mode when the power is sup- plied to this terminal can be done by making the appropriate selections from the DC IN MODE item in the SYSTEM menu.
4[9 PIN REMOTE] 9-pin remote ter- minal (D-SUB)
Use this terminal to connect to the
●Set the REMOTE switch on the front panel to “9 PIN”.
2[NTSC/PAL] NTSC/PAL signal se- lection switch
Use this switch to select NTSC or PAL as the signal system. Use it to make a selection when composite video signals or YC separate video signals are input.
NTSC : Use this setting for NTSC signal input.
The NTSC indicator on the front panel lights up.
PAL : Use this setting for PAL signal input.
The PAL indicator on the front panel lights up.
Memo
●For playback or DV signal input, signals are determined automatically and not affected by the status of this switch.
●Please turn the unit to POWER OFF before using this switch. If switching is performed when the VTR is in the POWER ON mode, the VTR will automatically go into the OFF mode before engaging the ON mode.
