Panasonic VQT0C55 manual
System menu

SYSTEM menu

SYSTEM menu

Items	Setting							Contents
STILL MODE	 FIELD	Use this item to select the still image type during the STILL mode or frame
	1st	advance playback:
	2nd	FIELD				: Displays field image. During frame advance playback, 1st and
	FRAME					2nd field images are displayed alternately.
		1st				: displays the 1st field image.
		2nd				: displays the 2nd field image.
		FRAME				: displays the frame image.
			Memo
		The image				type for the STILL mode can also be selected with the STILL
		MODE button on the wireless remote controller.
SERIES REC	 OFF	Set this item according to the recording time of the source tape during DV
TIME	25MIN	signal input series recording:
	55MIN	OFF				: No series recording.
	75MIN	25MIN				: Use this setting if the recording time of the source tape is 30
	115MIN					mins.
	175MIN	55MIN				: Use this setting if the recording time of the source tape is 60
	265MIN					mins.
		75MIN				: Use this setting if the recording time of the source tape is 80
						mins.
		115MIN : Use this setting if the recording time of the source tape is 120
						mins.
		175MIN : Use this setting if the recording time of the source tape is 180
						mins.
		265MIN : Use this setting if the recording time of the source tape is 270
						mins.
		(☞ Page 38 “Series recording function”)
STILL TIMER	30SEC	Sets the interval after the lapse of which the tape protection mode will be
	1MIN	engaged during an extended STILL mode. The setting for the STILL mode
	2MIN	can be done via the PAUSE PROTECT menu item.
	3MIN	30SEC: 30 seconds
	 5MIN	1MIN		: 1 minute			3MIN	: 3 minutes
		2MIN		: 2 minutes			5MIN	: 5 minutes
			Memo
		To prevent			damage, please set as short a time interval as possible.
PAUSE	 F.ADV	Sets the action to be taken when the unit has been left in the STILL mode for
PROTECT	STBY-OFF	an extended period of time. In the case of a recording pause, the unit will go
		into the STOP state to protect the tape, regardless of the setting.
		F.ADV				: It advances in the forward direction. On the 6th advancement,
						it goes into the STOP state.
		STBY-OFF				: Goes into the STOP state.
INDEX WRITE	OFF	Selects whether to record the index signals during recording which is en-
	 ON	gaged after the STOP or recording PAUSE mode.
		OFF		: No recording of index signal.
		ON		: Use this setting to record index signals. An index signal is automati-
				cally registered at the position where recording starts.
DC IN MODE	 POWER OFF	Select the action to perform when power is supplied via the DC IN terminal:
	POWER ON	POWER OFF : Sets the unit to POWER OFF.
	PLAY	POWER ON : Sets the unit to POWER ON.
		PLAY				: If a tape has been inserted, the VTR will go
						into the PLAY mode. (AUTO PLAY)
PAGE BACK		Return to the top MENU

E-55