Nortel Networks 1000M warranty Configuring the system monitor, System monitor cabling

170

Page 151 of 456

Configuring the system monitor

Contents

This section contains information on the following topics:

System monitor cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Configuring the System Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

Cabling the System Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Alarm interfacing to Candeo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

Configuring the alarm ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168

Customizing alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

System monitor cabling

Multi-column systems

Cabling between system monitors in a multi-column system requires the use of a single cable. The cabling is done in a daisy-chain fashion with the master system monitor at the beginning of the chain. The address of each slave system monitor must be unique and there cannot be any gaps in the slave numbering. Figure 62 shows a typical cabling scheme between columns.

Communication Server 1000M and Meridian 1 Large System Installation and Commissioning