Toshiba DP80F, DP85F manual Transmit Configuration, Document Specifications

- TRANSMIT CONFIGURATION

Document Specifications

The following table shows the specifications for original documents that can be used with this facsimile.

			Single Sheet		Multiple Sheets
	Max.		216 mm (W) x 1000 mm (L)
			[8.5 in. (W) x 39.37 in. (L)]
Document
Size	Min.		148 mm (W) x 100 mm (L)
			[5.83 in. (W) x 3.94 in. (L)]
Effective Scanning				214 mm
Width				[8.43 in.]
Max. Capacity of					Up to 15 sheets (Legal Size)
Document Tray					Up to 30 sheets (Letter Size)
Thickness of			0.06 to 0.15 mm		0.065 to 0.1 mm
Document		[0.003 to 0.006 in.]			[0.003 to 0.004 in.]
Type of Paper			Uncoated on both sides

NOTES:

•Operator assistance may be required for pages longer than 356 mm (14.02 inches).

•For multiple sheets, the documents must be the same size and paper type.

•A small border region of each document is not imaged when each document is scanned. The effective scanning area is as shown in the figure below.

Caution:

If the documents are any of the following, they should be copied to plain paper before transmitting.

•Torn, wrinkled, or damp pages

•Folded pages or pages with holes

•Transparent pages or pages with a smooth, shiny finish

•Cloth or metal sheets

When using originals with the following specifications, use a carrier sheet to avoid document jams or misfeeds. When using carrier sheets, only one sheet can be sent at a time.

•Smaller than minimum size.

•With thickness less than 0.05 mm.

To use a carrier sheet, lift the clear cover, place a single document sheet face-up on the paper sheet. Purchase carrier sheets from your TOSHIBA facsimile dealer or use a transparency with a paper backing attached at the lead edge.

Letter/Legal Size

216 mm (8.5 inches)

Effective

Scanning

Area

2.5 mm (0.1 inches)

2.5 mm (0.1 inches)

214 mm (8.43 inches)

81