Toshiba DP85F, DP80F manual Continuous Polling

Continuous Polling

Use this procedure to poll the same remote facsimile(s) on a regular schedule. Continuous Polling operations can be pro- grammed for specific time inter-

1 Display the POLLING Menu

2 Select PROG. CONT. POLL.

3 Enter the Polling	4 Enter the Start and
Interval	Stop Time

vals on the days selected. In ad- dition, a 4-digit security code can be used with other TOSHI- BA facsimiles when the docu- ment has a security code pro- grammed.

NOTES:

•Calls are performed with- in the set time period on the days selected with the set interval between callings.

•If multiple sending sta- tions are programmed, callings are performed to all those stations within the set time period.

•If the polling operation exceeds the set time pe- riod, it will continue until all the facsimiles have been polled.

•Redialing or calling to al- ternate dialing numbers is not available during this operation.

•If a power failure occurs during this procedure, the polling continues when power is restored.

•If the set time period is shorter than the set call- ing interval, polling will be performed only once at the start time.

Press:

+

+

POLLING

01.POLLING

02.POLLING RESERVE

03.TURNAROUND POLL

04.PROG. CONT. POLL.

Select “04.PROG. CONT. POLL.” by pressing:

+

INTERVAL
(10-70)	[ 0]

Enter the time interval between polling sequences (10 to 70 minutes).

Only interval settings of 10- minute increments are permis- sible. (Example: Enter “1” for 10 minutes or “2” for 20 min- utes, etc.)

Then press:

START/STOP TIME [08:00AM-05:00PM]

Enter the polling start and stop time.

When the time period is dis- played correctly, press:

NOTES:

•You may use / to

move the cursor left and right.

•If the 12-hour format is se- lected, you may use the

/ keys to se- lect AM or PM.

START/STOP DAYS

[MON-FRI] ↑↓

130