Toshiba DP85F, DP80F When the Recorded Image is not Clear, Document Scanner Cleaning Procedure

When the Recorded Image is not Clear...

If the Document Scanner Unit is dirty, your documents may not be transmitted clearly. If the Re- cording Unit is dirty, the docu- ment you receive may not be clear. In that case, clean the

Stained

Document Scanner Cleaning Procedure

1 Open the Operation	Wipe the Glass	3 Wipe the ADF Pad
	2 Surface and White
Panel	Plate	and Rollers

Document Scanner Unit or Re- cording Unit using the following procedures. You can check these problems by making a copy.

Examples of print problem:

Vertical black line(s)

Vertical white line(s)

Horizontal black line(s)

Horizontal white line(s)

Faint or blurred print

If the problem occurs during both a transmission and in copy mode, check the Document Scanner Unit.

If the problem occurs during both receptions and copy mode, check the Recording Unit.

62

Open the Operation Panel.

65

Wipe the Glass surface and the White Plate with a soft dry cloth.

•If it is very dirty, wipe it with a cloth soaked in water and wrung out, then wipe it with a dry cloth.

66

Wipe the ADF Pad and Rollers with a dry cloth.

•If it is very dirty, wipe it with a cloth soaked in water and wrung out, then wipe it with a dry cloth.

CAUTION:

Be careful not to injure your finger(s) on the ADF spring when you wipe the ADF pad.

224