Toshiba DP85F, DP80F manual Keys Used in Character Entry, Entry Procedure

Character Entry

When programming and regis- tering the Autodialer numbers or names, you will need to enter al- phanumeric characters.

This section helps you under- stand how to easily enter the characters.

Keys Used in Character Entry

[INSERT] Key

Inserts characters before the selected (underlined) character.

[DELETE] Key

Deletes the selected (underlined) charac- ter.

[ ] Key

Moves the cursor to the right. If pressed without entering a character, it inserts a space.

[ ] Key

Entry Procedure

NAME	(20 MAX)	An example to enter “NEW YORK”:
[	]

Press twice to display “N.” Note that “M” was dis- played on the first press followed by “N” on the second.

NOTE: If the next character is located on the same key

as the preceding character, press the key to move the cursor to the next position. Otherwise press the next desired key and the cursor will automatically move to the right.

Moves the cursor to the left.

The dial keypad is used to enter alpha- numeric characters. Both U.S. and Foreign alphanumeric characters may be selected with each Numeric Key. The U.S. characters are listed for your convenience above each key. By pressing the Numeric Key multiple times, you can scroll through all characters assigned to a particular key (see table below).

NAME	(20 MAX)
[N	]

	Press	2 times for E.
NAME		(20	MAX)
[NE			]
	Press	1 time for W.
NAME		(20	MAX)
[NEW			]

Press 2 times to insert a blank space.

NAME		(20 MAX)
[NEW	]

	Press	3 times for Y.
NAME		(20 MAX)
[NEW Y		]
	Press	3 times for O.
NAME		(20 MAX)
[NEW YO		]
	Press	3 times for R.
NAME		(20 MAX)
[NEW YOR		]
	Press	2 times for K.
NAME		(20 MAX)
[NEW YORK		]

36