260
Browse Folders - continued

Changing the Device Configuration - continued

Edit the device configuration

Select or enter the value for items that you want to change the
configurations.
Click the ü button to download the new settings to your DP80F/
DP85F. Back to Step 2a.
NOTE:
Click the ✘ button to cancel adding/editing the device configura-
tion. Back to Step 2a.

Change the Device settings

3
3a
You can remotely configure the
device settings using the
TOSHIBA Viewer.
After clicking Setup... on the
Device Tab screen, the
TOSHIBA Viewer retrieves the
device settings from the DP80F/
DP85F.
When you want to change the
device settings file directly, go
to Step 3a.
When you want to change the
device settings file by copying
the settings from a set file lo-
cated on your hard disk, go to
Step 3b.
When you want to change the
device settings file by copying
the settings from a user settings
file stored within TOSHIBA
Viewer, go to Step 3c.
For additional information on a
specific item, refer to Help and
the appropriate section of the
DP80F/DP85F Operator's
Manual.

Load a set file on your hard disk

Double-click on Add settings file.
A “New settings” file is created.
Right-click on the new settings file and select Load....
NOTE:
In order to create a user settings file to be saved on your hard
disk, refer to the section “Saving the Device Configuration”.
The Load settings screen appears. Designate the hard disk loca-
tion of the desired set file, select the file, then click on Open. The
set file is loaded.
Continue to Step 3c.
3b