Toshiba DP85F, DP80F manual Sensor Test, Check the Top Cover Check the Paper Tray

SENSOR TEST

The switch test checks if the de- tection switches operate nor- mally.

1 Select the SWITCH TEST Menu

2 Check the Top Cover 3 Check the Paper Tray

The test items in SWITCH TEST mode are as follows:

•Detection of Top Cover open/closed status

•Detection of Recording Pa- per and Recording Paper Tray presence/absence sta- tus

NOTE:

If no operation is performed within 10 seconds after an operational instruction is dis- played on the screen during the switch test, the test result will be judged to be NG.

Press:

+

+

+

+

SENSOR TEST OPEN TOP COVER

Open the Top Cover. When its open state is detected, the screen below appears. After checking that the screen is dis- played, close the Top Cover.

Detects the open state of the Top Cover.

SENSOR TEST

CLOSE TOP COVER

Close the cover

SENSOR TEST

REMOVE PAPER

If no recording paper is placed in the Recording Paper Tray, the screen below is displayed. You can resume the test by loading the paper.

SWITCH TEST

PUT IN PAPER

Remove the Recording Paper in the Recording Paper Tray. When the absence of a Paper is detected, the screen below ap- pears. After checking that the screen is displayed, install the Recording Paper in the Paper Tray.

Detects the absence of the Recording Paper.

SENSOR TEST

PUT IN PAPER

Install the Recording

Paper

SENSOR TEST

OK

If an Optional Recording Paper Tray is installed, follow the same test procedure for the Op- tional Recording Paper Tray.

SENSOR TEST

REMOVE PAPER TRAY 2

Detects the absence of the Recording Paper

SENSOR TEST

PUT IN PAPER TRAY 2

Install the Recording Paper

The result of the switch test (“OK” or “NG”) is displayed on the screen, and the unit returns to the individual test selection screen.

236