101
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
Pick up the handset of the Ex-
ternal Telephone connected to
the “TEL” connector of the fac-
simile.
The External Telephone is con-
nected to the telephone line via
the facsimile, and the dial tone
is heard through the speaker of
the External Telephone.
The display on the facsimile
shows “EXTERNAL OFF
HOOK” on the LCD display.
Dial the facsimile number of the
remote party using the keypad
of the External Telephone.
The entered number is immedi-
ately dialed. The number is not
displayed on the facsimile’s
LCD display.
NOTE:
When the External Tele-
phone is in the off-hook sta-
tus (i.e. while “EXTERNAL
OFF HOOK” is displayed),
the Dial Keypad on the fac-
simile does not accept any
key entry.
When you hear the answering
tone, press on the
facsimile. If the remote party
answers the phone, you can in-
form the remote party that you
wish to send a document.
Upon hearing the facsimile
tone, press:
Then replace the handset of the
External Telephone.
When the transmission is com-
pleted, the facsimile returns to
the Standby Mode.
This procedure may be useful
when you want to talk with a re-
mote party before sending a
document. A telephone set must
be connected to the “TEL” con-
nector. (This telephone set is
called the “External Telephone”
in this manual.)
Direct Transmission - continued
External Off-hook Transmission (Transmission Using an External Telephone)
Load the Document
1

Dial on the External

Telephone

3
Press The START
Key
4

Pick Up the Handset of

the External Telephone

2
MAY-17 09:43 AM 100%
AUTO RECEIVE
EXTERNAL OFF HOOK
MAY-17 09:43 AM 100%
AUTO RECEIVE