Toshiba DP85F, DP80F manual Abbreviated Dialing

Abbreviated Dialing

Once an Abbreviated Dial Num- ber is programmed with a valid remote facsimile location, that location can be accessed by re- calling the corresponding Abbre-

1 Press the SPEED DIAL Key

2 Enter the Abbreviated Number

3 Press the START Key Tray

viated Dial Number.

The document must be loaded and the resolution and contrast set before a transmission using Abbreviated Dialing (see pages 83 and 84).

Press:

+

ABB. NUMBER
(1-999)	[ ]

Enter the Abbreviated Dial Num- ber (1 to 999) assigned to the desired party.

NOTE:

When an incorrect number is

entered, use to delete

preceding digits, or press

once to start over

from the beginning.

Example of		Abbreviated Dial
Number, 10:
	ABB. NUMBER
	(1-999)	[ 10]

When the correct number is dis- played, press:

The Abbreviated Dial Number and the name of the party will appear on the LCD display for about 2 seconds.

Your facsimile will automatically start scanning the document into memory (if enabled). While scanning, the facsimile dials, connects, and starts transmis- sion.

ABB. NBR=	10
LONDON OFFICE

Displayed for 2 seconds

SCANNING	DOC	P001
FILE NBR	=	091

During scan to memory

MAY-17 09:43 AM 99% AUTO RECEIVE

During transmission

NOTE:

When the number entered (within the range of 1 through 999) is not prepro- grammed with a specific par- ty’s facsimile or telephone number, the message “NUM- BER NOT LISTED” is dis- played for 2 seconds and then the facsimile returns to the screen in Step 1.

ABB. NBR= 10

NUMBER NOT LISTED

Displayed for 2 seconds

90