171
This function prevents your fac-
simile from sending to an incor-
rectly dialed phone. With this
function set ON, the dialed num-
ber will be checked against the
remote facsimile’s programmed
Transmit Terminal ID (TTI). The
transmission will only occur if
the number dialed matches the
remote party’s number.
NOTE:
To change the default set-
ting of this function, refer to
page 150. The status selec-
tion in this operation will take
precedence over the default
setting.
Press:
+
+
+
+
Turn ON Security Transmission
by pressing:
Load the document face down
in the Document Support (see
page 82).
Adjust the resolution and con-
trast if desired (see pages 83
and 84).
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option at
this point.
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
• Alphabet Dialing
... See page 91
• Keypad Dialing
... See page 92

Security Transmission

Load the Document
1
Display the

SECURITY TX Menu

2
Select the Option
3
Enter the Facsimile
Number
4
- TRANSMISSION OPTIONS
MAY-17 09:43 AM 100%
AUTO RECEIVE
1.ON
SECURITY TX
2.OFF
MAY-17 09:43 AM 100%
ENTER TEL NUMBER