INSTALLING
Continued
B.Clearances from the side of the stove opening to any combustible wall should not be less than 20 inches (see Figure 7).
C.Clearances from the top of the stove opening to the ceiling should not be less than 52 inches (seeFigure 7).
52"
20" |
|
|
|
| 20" | |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Door
Handle
Figure 7 - Minimum Clearance to Wall and Ceiling
INSTALLING GA3700 BLOWER ACCESSORY
1.Install blower assembly per instruction sheet included in blower accessory kit.
2.Route blower power cord out the back of the stove and to a grounded, three- prong
INSTALLING LOG HEATER IN STOVE
CAUTION
WARNING ICON | G 001 |
|
|
Do not pick up log base assembly by burners. This could damage burners. Only handle base by grates.
1.If installing GA3700 Blower Accessory , see Installing GA3700 Blower Acces- sory, above.
NOTICE
Most building codes do not permit concealed gas connections. A flexible gas line is provided to allow accessibility from the stove. The manual shutoff valve should be accessible.
2.Attach gas log heater base to stove bottom with two screws included with base (see Installing Heater Base Assembly in log set owner’s manual).
103661
11
