Toshiba DP85F, DP80F manual Selecting the Reception Mode Recording Paper Size

Selecting the Reception Mode

Recording Paper Size

The Automatic Reception Mode (AUTO RECEIVE) is normally selected. You can change the reception mode by pressing the

If Auto Receive mode is se- lected, press:

This facsimile can use Letter and Legal size paper. The received document is recorded (printed) within the Effective Recording Area of the paper.

key.

Refer to Reception Mode selec- tion on page 62.

Press:

If FAX/TAD mode is selected, press:

Effective

Recording

Area

B

A

		Paper Size	A	B	C	D
C	D	Letter: mm	216	212	274	279
		inches	8.5	8.34	10.8	11.0
		Legal: mm	216	212	351	356
		inches	8.5	8.34	13.8	14.0

RECEPTION MODE 1.FAX

2.FAX/TAD

3.TEL/FAX

4.MANUAL

If TEL/FAX mode is selected, press:

If Manual Receive mode is se- lected, press:

NOTES:

•If the received document is equal to or shorter than the recording area of the paper, the received document is printed at its actual size.

•If the received document is larger than the recording area of the paper, it will be vertically and horizontally reduced to fit on the recording paper installed. The reception will be divided onto two sheets if the document needs to be reduced to smaller than 73% of its original size.

Document

Recording

Paper

•If you desire to receive large originals without reduction or excessive paper usage, set the ”DISCARD” function to “ON.” If the lower part of the original exceeds the recording paper by 13 mm or less, the image will be automatically discarded. This predetermined dimension is a service function setting. Contact your Toshiba dealer for setup.

•If the “RX REDUCTION” function is “OFF”, the larger original will be recorded on two or more sheets. The top of the second page will repeat about 5 mm of the lower part of the first page.

106