Toshiba DP85F, DP80F manual Dial Type Setting

Dial Type Setting

There are two types of dialing modes: DP [Dial Pulse (Rotary)] and MF [Multi-Frequency (touch tone)]. If your telephone emits tones when you are dialing, this

1 Display the DIAL	2 Select Your Dial	3 Enter the Access
TYPE Menu	Type	Digits

4 Select Another

SETUP Item, or ...

usually indicates that you have a MF type line and no adjust- ment is required. Otherwise, you will have to select the appropri- ate setting.

To display the SETUP menu, press:

+

INITIAL SETUP 1.LANGUAGE

Display

INITIAL SETUP 4.DIAL TYPE

Using or and press:

or

DIAL TYPE

1.TONE

2.PULSE

Select your dial line type.

(for Multi-Frequency type)

default

(for Dial Pulse type)

After selecting the dial type, the following will be displayed.

DELETE ACCESS DIGIT

[]

Access digits are numbers which are required by PBX sys- tems to access the phone sys- tem “outside” the PBX. A com- mon access digit is “9.”

PBX Access Digits such as 9, pause, and 1 need to be omitted when using chain dialing.

If you will not be using the Chain

Dial feature, press to skip this step.

Otherwise, enter the Access Digits to be deleted (max. 10 digits) using the Dial Keypad.

When the correct Access Digit is displayed, press:

COMPLETED

Displayed for 2 seconds

Returns to display the SETUP menu screen.

After completing this Configura- tion Setting, you may continue to select other settings referring to their associated pages for in- structions, or press

to exit the Configuration Setting mode and return to the Standby Mode.

44