66
Abbreviated Dialer Registration - continued
To delete the contents stored in
the Abbreviated Dial Number,
press:
(to DELETE)
To change the number or Loca-
tion ID (remote facsimile name)
currently assigned to an exist-
ing Abbreviated Dial Number,
press:
(to MODIFY)
The facsimile number currently
assigned is displayed on the
bottom row.
If you do not wish to change the
Abbreviated Dial Number infor-
mation, press:
(to RETAIN)
Return to Step 3 to select a dif-
ferent Abbreviated Dial Number
or press to return to the
Standby Mode.
You can delete, modify, or retain
Abbreviated Dial Numbers regis-
tered in this facsimile.
•DELETE
Deletes the information
stored in the selected Abbre-
viated Dial Number. It will
also remove the number
from all associated Group Di-
aling Directories.
•MODIFY
Allows you to change the re-
mote facsimile number and/
or associated Location ID
name. This selection is rec-
ommended if the location is
used in Group Dialing Direc-
tories.
•RETAIN
Retains the selected Abbre-
viated Dial Number informa-
tion without modification.

Change the ABB. Information

5

Delete the ABB. Dial

Information

5a Modify the ABB. Dial

Information

5b Retain the Current

ABB. Dial Information

5c
Then press:
Return to Step 3.
SPEED DIAL NBR 001
ARE YOU SURE ?
Skip to Step 6.
FAX NUMBER (128MAX)
[XXXXX ]
Enter the telephone number you
want to store (up to 128 digits).
NOTE:
If your facsimile is connected
to a PBX system, you may
need to enter an access digit
(9) and a pause so the sys-
tem will connect you to an
outside line. In such cases,
press to enter a 3-sec-
ond pause. This pause may
be repeated if necessary and
may be entered anywhere
between digits. A pause en-
try is indicated as a hyphen
“–” on the LCD display.
Enter the Telephone
Number
6