Scan Resolution Setting

The scan resolution can be set to one of the following five modes based on the type of im- age you are scanning.

The scan resolution is normally set to the default setting. When you change the resolution, the facsimile will return to the de- fault setting after each transac- tion. To change the default reso- lution setting, see page 85.

STANDARD

For sending normal text and graphics.

FINE

For sending normal text and graphics with extra clarity.

U-FINE(Ultra-Fine)

For sending fine text and graphics with extra clarity.

FINE HALFTONE

For detailed photos or docu- ments with colors or shading.

U-FINE HALFTONE

(Ultra-Fine Halftone)

For very detailed photos or documents with colors or shading.

Press until the required resolution mode is indicated by the appropriate LED.

The mode changes as follows:

 

: illuminated

(

: extinguished )

 

 

FINE

 

 

 

U-FINE

Standard Mode (when all the lamps are extinguished)

HALFTONE

 

 

 

FINE

 

 

 

U-FINE

Fine Mode

 

 

HALFTONE

 

 

 

FINE

U-FINEUltra-Fine Mode

HALFTONEEach corresponding lamp is illuminated.

FINE

U-FINEFine Halftone Mode

HALFTONE

FINE

U-FINEUltra-Fine Halftone Mode

HALFTONE

*When Ultra-Fine is selected, the DF80F/DP85F will scan all documents at 406 dots/inch horizontal x 391 lines/inch vertical. Depending on the capabilities of the remote facsimile receiving this document, the document may be transmitted by the DF80F/ DP85F at Ultra-Fine resolution (406 dots/inch horizontal x 391 lines/inch vertical) or it may be transmitted at Super Fine (203 dots/inch horizontal x 391 lines/inch vertical).

83

Page 85
Image 85
Toshiba DP80F, DP85F manual Scan Resolution Setting, Fine