Toshiba DP80F, DP85F manual Sending Recovery Transmission

Sending Recovery Transmission

This operation is used to re-send a document after the document initially failed to be sent. If recov- ery transmission is set to ON, the document is stored in the

1 Display the

RECOVERY

TRANSMIT Menu

2 Select the Desired	3 Change the
Job	Facsimile Number

4 Cancel the Document

DP80F/DP85F for resending.

NOTE:

When the Recovery Trans- mission is set to OFF, an er- ror tone and “NOT AL- LOWED NOW” LCD prompt result when Recovery Trans- mission is selected.

If there is no document stored for recovery transmis- sion, an error tone sounds and “NO ENTRY” LCD prompt will be displayed.

Press:

+

+

+

+

Press or to

view the jobs stored for resend- ing. The information is dis- played on the LCD display.

RECOVERY TX [ENTER]:START

FILE NBR =	005
12345

To cancel the document, go to Step 4.

When the sending document to be recovered was sent using the One Touch key, Abbreviated Dial Number, Group Number, or Alphabet Dialing, press:

You can also change the num- ber of the remote facsimile if di- aled from the Dial Keypad.

To re-transmit the document or change the facsimile number,

press .

JOB NUMBER 005

1.START

2.CHANGE

To start the transmission, press:

To change the number, press:

FAX NUMBER (MAX128)

[12345]

Enter the new facsimile number.

If the correct number is entered, press:

The transmission starts immedi- ately if the phone line is avail- able.

Press:

DELETE JOB NUMBER005 1.YES

2.NO

181