151
This function enables the at-
tachment of a cover sheet to the
document being transmitted.
Prior to selecting this function
for the first time, you may wish
to prepare a Cover Sheet image
(Logo) to be used on the cover
sheet. See Step 4 of this proce-
dure.
Load the image document to be
included on the cover sheet.
NOTE:
In preparing a document for
your cover sheet image, only
a limited area of the sheet
will be included as shown
below. Any data out of the
specified range will be disre-
garded.
To include an image (a scanned
company logo, etc.), press:
(for YES)
Press:
+
+
+
+
Enable or Disable the Cover
Sheet attachment.
(for ON-Enable)
(for OFF-Disable)
When “ON” is selected, the fol-
lowing screen is displayed.
When “OFF” is selected, the
“COMPLETED” message will be
displayed. The facsimile returns
to the Standby Mode.
When the document is pulled
into the appropriate position,
the following screen is dis-
played.
Press:
When scanning is complete, the
facsimile returns to the Standby
Mode.

Display the COVER

SHEET Menu

1

Enable / Disable the

Cover Sheet

2

Include an Image on

the Cover Sheet

3

Load the Image

Document

4
5.9 in.
(150mm)
Feed
Direction
Effective
Range
Cover Sheet Registration
1.ON
COVER SHEET
2.OFF
2.NO
LOAD DOCUMENT
1.YES
Go to Step 4.
To omit an image on the cover
sheet, press:
(for NO)
When “NO” is selected, the
“COMPLETED” message will be
displayed. The facsimile returns
to the Standby Mode.
LOAD DOCUMENT
Image Area
PRESS [START]