USER GUIDE
Figure 15 Network >Configuration page
12.1 Network > Configuration
Consult your Network Administrator for the network settings. Device name - Type a name for the Smart 216 IP.
TCP Ports - Choose any 3 TCP ports from port #800 to 65535. (When managed by KVM.net® II, the port numbers can be changed from KVM.net GUI if needed).
Notes
Firewall or router security access list must enable inbound communication through the selected TCP ports for the Smart 216 IP’s IP address.
For Client computer access from a secured LAN, the selected ports should be open for outbound communication.
12.1.1 LAN
In the LAN section – see Figure 15 – is the following:
Enable DHCP – When a DHCP server is active on the same network to which Smart 216 IP is connected, DHCP provides automatic IP assignment.
When DHCP is disabled – (Recommended) – You can assign a fixed IP address to the Smart 216 IP.
Consult your Network Administrator regarding the use of the DHCP.
When DHCP is disabled, enter the IP Address, Subnet Mask, and Default Gateway for LAN, as given by your Network Administrator.
These parameters can be configured locally from the OSD as explained on page 12.
16
