GPIB Command Dictionary
CONFigure subsystem
:SPOR10SPORT10SB10SP10:MODem:CONNect:HDELay
:SPOR10SPORT10SB10SP10:MODem:CONNect:HDELay?
This command sets/queries the number of seconds to wait before attempting an origination. This applies to the delay prior to attempting a dialback as well as the delay prior to retrying an origination as part of the retry sequence.
Syntax
CONF:SPOR10:MOD:CONN:HDEL <integer>
CONF:SPOR10:MOD:CONN:HDEL?
Screen/field equivalent
CONF:SPOR10:MOD:CONN:HDEL controls the
:SPOR10SPORT10SB10SP10:MODem:CONNect:RETRy
:SPOR10SPORT10SB10SP10:MODem:CONNect:RETRy?
This command sets/queries the number of calls that will be tried before an origination attempt is terminated. The total number of tries will be the number entered in this field, plus one for the original attempt.
Syntax
CONF:SPOR10:MOD:CONN:RETR <integer>
CONF:SPOR10:MOD:CONN:RETR?
Screen/field equivalent
CONF:SPOR10:MOD:CONN:RETR controls the Retries field on the MODEM CONFIGURE screen when the Serial Port field is set to Port 10.
:SPOR10SPORT10SB10SP10:MODem:CONFigure:UPDate
This command is used to send the modem configuration strings entered in the CONF:SPOR10:MOD:CONF:STR1, STR2, and STR3 commands.
Syntax
CONF:SPOR10:MOD:CONF:UPD
Screen/field equivalent
CONF:SPOR10:MOD:CONF:UPD controls the Modem Configuration field on the MODEM CONFIGURE screen when the Serial Port field is set to Port 10.
180 | Chapter 1 |
