![](/images/new-backgrounds/1182399/182399201x1.webp)
GPIB Command Dictionary
CANalyzer subsystem
:AUTO:GAIN?
This command returns the gain setting. The value and mode of the gain are set by the commands :PATH:GAIN and :PATH:GAIN:MODE. This query is valid only while measuring rho, EVM or channel power.
Syntax
CAN:AUTO:GAIN?
Screen/field equivalent
CAN:AUTO:GAIN? queries the Gain field of the CDMA ANALYZER screen. This field is displayed when a rho, EVM, or channel power measurement is selected.
:AUTO:POWer:GAIN?
This command returns the gain setting. The value and mode of the gain are set by the commands :POW:GAIN and :POW:GAIN:MODE. This query is valid only while measuring average power.
Syntax
CAN:AUTO:POW:GAIN?
Screen/field equivalent
CAN:AUTO:POW:GAIN? queries the Pwr Gain field of the CDMA
ANALYZER screen when measuring average power.
:CHANnel:POWer:CALibrate
This command calibrates the channel power measurement. The Test Set requires a few moments to complete this calibration. To determine when the calibration is finished, poll the status register.
Syntax
CAN:CHAN:POW:CAL
Example
CAN:CHAN:POW:CAL | !calibrates channel power |
Screen/field equivalent
CAN:CHAN:POW:CAL controls the Chn Pwr Cal field of the CDMA ANALYZER screen while measuring channel power.
Chapter 1 | 101 |