GPIB Command Dictionary

MEASure subsystem

:CDANalyzer:MARKer:PHASe <meas cmnd> :CDANalyzer:MARKer:PHASe?

IS-95 Only mode. These commands set/query the phase at the marker on the code domain analyzer’s trace during phase measurements (see :CDAN:MEAS on page 124).This measurement is made relative to the value at Walsh Code 0.

This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.

Syntax

MEAS:CDAN:MARK:PHAS <meas cmd>

!See “Number Measurement Syntax” on page 283. MEAS:CDAN:MARK:PHAS?

Example

MEAS:CDAN:MARK:PHAS?

Screen/field equivalent

MEAS:CDAN:MARK:PHAS? reads the Phse field on the Marker menu of the CODE DOM screen when a phase measurement is selected. This applies when the CDMA standard is set to “IS-95 Only”.

230

Chapter 1

Page 230
Image 230
Agilent Technologies E6380-90073 manual CDANalyzerMARKerPHASe meas cmnd CDANalyzerMARKerPHASe?