![](/images/new-backgrounds/1182399/182399193x1.webp)
GPIB Command Dictionary
AFG2ENCoder subsystem
:NAMPsNTACs:FVC:FM <real number> :NAMPsNTACs:FVC:FM?
This command sets/queries the data level when the AFG2:DEST ‘FM’ command is used. The data level units are kHz.
This command utilizes the “Real Number Setting Syntax” on page 299.
Syntax
AFG2:NAMP:FVC:FM
AFG2:NAMP:FVC:FM?
Screen/field equivalent
AFG2:NAMP:FVC:FM controls the Data Level field when AFGen2 To field is set to FM on the SIGNALING ENCODER screen when the Mode field is set to
:NAMPsNTACs:FVC:LEVel <real number> :NAMPsNTACs:FVC:LEVel?
These commands set/query the data level when the AFG2:DEST ‘Audio Out’ command is used. The data level units are mV.
This command utilizes the “Real Number Setting Syntax” on page 299.
Syntax
AFG2:NAMP:FVC:LEV
AFG2:NAMP:FVC:LEV?
Screen/field equivalent
AFG2:NAMP:FVC:LEV controls the Data Level field when AFGen2 To field is set to Audio Out on the SIGNALING ENCODER screen when the Mode field is set to
Chapter 1 | 97 |