
GPIB Command Dictionary
MEASure subsystem
:CANalyzer:RHO <meas cmnd> :CANalyzer:RHO?
These commands set/query the rho measurement.
This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.
Syntax
MEAS:CAN:RHO <meas cmd>
!See “Number Measurement Syntax” on page 283. MEAS:CAN:RHO?
Example
MEAS:CAN:RHO?
Screen/field equivalent
MEAS:CAN:RHO? reads the Rho measurement field on the CDMA ANALYZER screen. This measurement is also displayed on the CDMA GENERATOR screen.
:CANalyzer:TIME:OFFSet <meas cmnd> :CANalyzer:TIME:OFFSet?
These commands set/query the time offset measurement.
This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.
Syntax
MEAS:CAN:TIME:OFFS <meas cmd>
!See “Number Measurement Syntax” on page 283. MEAS:CAN:TIME:OFFS?
Example
MEAS:CAN:TIME:OFFS?
Screen/field equivalent
MEAS:CAN:TIME:OFFS? reads the Time Offset measurement field on the CDMA ANALYZER screen. This measurement is also displayed on the CDMA GENERATOR screen.
Chapter 1 | 225 |