![](/images/new-backgrounds/1182399/182399537x1.webp)
GPIB Command Dictionary
MEASure subsystem
:DEC:NAMP:DTMF:HIGH:FREQuency:ERRor <meas cmnd> :DEC:NAMP:DTMF:HIGH:FREQuency:ERRor?
These commands set/query the frequency error of the high tone in the DTMF pair. The MEAS:DEC:NAMP:DTMF:HIGH:DISP ‘Frq Err’ command must be used to display the frequency error of the high tone.
Syntax
MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ERR
!See “Multiple Real Number Setting Syntax” on page 282
MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ERR? !returns up to 19 real values
Screen/field equivalent
MEAS:DEC:NAMP:DTMF:HIGH:FREQ:ERR? reads the Hi Tone column on the SIGNALING DECODER screen when the Mode field is set
:DEC:NAMP:DTMF:HIGH:DISPlay <string> :DEC:NAMP:DTMF:HIGH:DISPlay?
These commands set/query the display mode of the high tone in the
DTMF pair.
Syntax
MEAS:DEC:NAMP:DTMF:HIGH:DISP ‘Freq’
‘Frq Err’
MEAS:DEC:NAMP:DTMF:HIGH:DISP:ERR?
Screen/field equivalent
MEAS:DEC:NAMP:DTMF:HIGH:DISP controls the upper subfield of the Hi Tone field on the SIGNALING DECODER screen when the Mode field is set
Chapter 1 | 269 |