
GPIB Command Dictionary
AFG2ENCoder subsystem
:POLarity <string> :POLarity?
This command causes the digitally modulated signals to be sent with a normal or inverted response to the digital data. When Inverted, a digital 1 produces a frequency shift in an FM carrier opposite to normal operation.
Syntax
AFG2:POL ‘Norm’
‘Invert’
AFG2:POL?
Screen/field equivalent
AFG2:POL controls the Polarity field on the SIGNALING ENCODER screen when the Mode field is set to
:SEND:MODE <string> :SEND:MODE?
These commands set/query the mode used when a message is sent.
•‘Single’ outputs the entire message once.
•‘Burst’ outputs the message the number of times specified by the AFG2:BURS command.
•‘Cont’ outputs the message continuously until the AFG2:STOP command is sent.
•‘Step’ outputs a single step in an encoder sequence each time the AFG2:SEND command is sent. After the entire sequence is output, the encoder returns to the first character in the sequence.
Syntax
AFG2:SEND:MODE ‘Single’
‘Burst’
‘Cont’
‘Step’
AFG2:SEND:MODE?
Screen/field equivalent
AFG2:SEND:MODE controls then Send Mode field on the SIGNALING ENCODER screen when the Mode field is set to
Chapter 1 | 73 |