Agilent Technologies E6380-90073 manual OUTPut real number OUTPut?, PEMPhasis string PEMPhasis?

GPIB Command Dictionary

AFG2ENCoder subsystem

:OUTPut <real number> :OUTPut?

This command sets the amplitude of the audio signal (volts rms) at the AUDIO OUT connector if the AFG2:DEST is ‘Audio Out’.

This command utilizes the “Real Number Setting Syntax” on page 299.

Syntax

AFG2:OUTP <real number>

AFG2:OUTP?

Screen/field equivalent

AFG2:OUT controls the AFGen2 To field (lower subfield) on the RF

GENERATOR screen when the upper subfield is set to Audio Out.

:PEMPhasis <string> :PEMPhasis?

This command sets pre-emphasis filters for the DTMF encoder.

Syntax

AFG2:PEMP ‘On’

‘Off’

AFG2:PEMP?

Screen/field equivalent

AFG2:PEMP controls the Pre-Empfield on the SIGNALING ENCODER screen when the Mode field is set to DTMF.

72 Chapter 1