GPIB Command Dictionary
MEASure subsystem
:SANalyzer:TRACe?
This command returns an array of 417 real values, corresponding to points on the spectrum analyzer’s display. 0 corresponds to the first value (left side of trace display) and 416 is the last value (right side of the trace display).
This measurement utilizes the Number Measurement Syntax, but does not use the :METer command.
Syntax
MEAS:SAN:TRAC?
Example
MEAS:SAN:TRAC? !returns the array
Screen/field equivalent
MEAS:SAN:TRAC has no corresponding field on the SPEC ANL screen.
Chapter 1 | 281 |