
GPIB Command Dictionary
CGENerator subsystem
:EBNO:LEVel <real number> :EBNO:LEVel?
These commands set/query the level of the generator when it is in Eb/No mode. This command utilizes the “Real Number Setting Syntax” on page 299, but does not use the :STATe command.
Syntax
CGEN:EBNO:LEV <real number> !values from −5 to +25 dB
CGEN:EBNO:LEV?
Screen/field equivalent
:EBNO:LEV controls the generator’s level when the Gen Mode field on the CDMA GENERATOR screen is set to Eb/No.
:EQFilter <string> :EQFilter?
These commands set/query the setting of the equalization filter used to create forward channel signals. This command is used when you want to override the default setting (EQ In). The filter is bypassed for reverse link signals and cannot be overridden. Therefore, this command is valid only when the CGEN:DIR ‘Fwd’ command is used.
Syntax
CGEN:EQF ‘EQ In’ !switches the Equalization filter in
‘Out’ | !bypasses the Equalization filter |
CGEN:EQF?
Screen/field equivalent
CGEN:EQF controls the EQ In/Out subfield of the Gen Dir field on the CDMA GENERATOR screen. This field is displayed only when Fwd is selected in the Fwd/Rev subfield.
148 | Chapter 1 |