GPIB Command Dictionary
AFG2ENCoder subsystem
:FGENerator:SUNits <string> :FGENerator:SUNits?
These commands set/query whether the signal’s output is in units of rms or peak. The AFG2:DEST ‘Audio Out’ command must be used with this command.
Syntax
AFG2:FGEN:SUN ‘RMS’
‘Peak’
AFG2:FGEN:SUN?
Screen/field equivalent
AFG2:FGEN:WAV controls the Sine Units field on the SIGNALING ENCODER screen when the Mode field is set to Func Gen and the AFGen2 To field is set to Audio Out.
:FGENerator:WAVeform <string> :FGENerator:WAVeform?
These commands set/query the type of waveform generated by the function generator.
Syntax
AFG2:FGEN:WAV ‘Sine’ ‘Square’ ‘Triangle’
‘Ramp(+)’
‘Uni Noise’ !Universal noise ‘Gau Noise’ !Gaussian noise
AFG2:FGEN:WAV?
Screen/field equivalent
AFG2:FGEN:WAV controls the Waveform field on the SIGNALING
ENCODER screen when the Mode field is set to Func Gen.
Chapter 1 | 87 |
