GPIB Command Dictionary
AFG2ENCoder subsystem
:DTMF:ONTime <real number> :DTMF:ONTime?
These commands set/query the length of time each DTMF tone is on during the sequence.
This command utilizes the “Real Number Setting Syntax” on page 299, but does not use the :STATe command.
Syntax
AFG2:DTMF:ONT <real number>
AFG2:DTMF:ONT?
Screen/field equivalent
AFG2:DTMF:ONT controls the On Time field on the SIGNALING
ENCODER screen when the Mode field is set to DTMF.
:DTMF:SEQuence <string> :DTMF:SEQuence?
These commands set/query the sequence of tones output by the signaling encoder.
Syntax
AFG2:DTMF:SEQ <string>
AFG2:DTMF:SEQ?
Screen/field equivalent
AFG2:DTMF:SEQ controls the Sequence field on the SIGNALING
ENCODER screen when the Mode field is set to DTMF.
Chapter 1 | 85 |
