GPIB Command Dictionary
CONFigure subsystem
CONFigure subsystem
The CONFigure subsystem contains commands that control several different screens: I/O CONFIGURE, INSTRUMENT CONFIGURE, and
PRINTER CONFIGURE.
:BADDress <integer> :BADDress?
These commands set/query the GPIB address for the Test Set. This command utilizes the “Integer Number Setting Syntax” on page 206.
Syntax
CONF:BADD <integer> !valid from 0 to 30
CONF:BADD?
Screen/field equivalent
CONF:BADD controls the
:BEEPer <string> :BEEPer?
These commands set/query the volume of the Test Set’s beeper.
Syntax
CONF:BEEP ‘Off’
‘Quiet’
‘Loud’
CONF:BEEP?
Screen/field equivalent
CONF:BEEP controls the Beeper field of the INSTRUMENT
CONFIGURE screen.
150 | Chapter 1 |
