Agilent Technologies E6380-90073 manual CDANalyzerIS2000TRACePOWerPOWerVALue?, DECAMPSTACSNBITs?

GPIB Command Dictionary

MEASure subsystem

:CDANalyzer:IS2000:TRACe:POWer:POWer[:VALue]?

IS-2000 only. This query returns an array of 128 values that represent the channel power relative to the selected reference channel power in a Power & Noise measurement.

NOTE	The values returned represent the relative power of individual Walsh
	channels not the supplemental channels of which they may be a part.
	The power of supplemental channels in a Power & Noise measurement
	must be read directly from the Marker Lvl value on the Code Domain
	Analyzer screen.
	Syntax
	MEAS:CDAN:IS2000:TRAC:POW:POW[:VAL]?
	Screen/field equivalent
	MEAS:CDAN:IS2000:TRAC:POW:POW[:VAL]? displays information
	(top value of each bar) for the power and noise measurement when the
	CD pwr unit is set to Rel on the Reference menu of the CODE
	DOMAIN screen when the CDMA standard is set to “IS-2000”.

:DEC:AMPSTACS:NBITs?

These commands set/query the number of bits measured by the signaling decoder in AMPS-TACS mode.

Syntax

MEAS:DEC:AMPS:NBIT?

Example

MEAS:DEC:AMPS:NBIT? !returns an integer value reporting the number of bits measured by the signaling unit.

For example, if the Signaling Decoder displays a value of 928 in the Num of Bits field of the SIGNAL DECODER screen, the value 928 will be returned by the query.

Screen/field equivalent

MEAS:DEC:AMPS:NBIT? reads the Num of Bits measurement field on the SIGNALING DECODER screen when the Mode field is set to AMPS-TACS.

Chapter 1 259