Agilent Technologies E6380-90073 manual TRIGgerDELay real number TRIGgerDELay?

GPIB Command Dictionary

OSCilloscope subsystem

:TRIGger:DELay <real number> :TRIGger:DELay?

These commands set/query the trigger delay. Positive values delay the trigger, negative values apply a pre-trigger function to each measurement.

This command utilizes the “Real Number Setting Syntax” on page 299, but does not use the :STAT, :DUN, :UNIT, :INCR:MODE, :INCR:DUN, commands.

The valid range of the delay depends on the Time/div setting. See

OSC:SCAL:TIME to set the Time/div.

Syntax

OSC:TRIG:DEL <real> !values depend on Time/div

OSC:TRIG:DEL?

Example

OSC:TRIG:DEL 0.2 !sets to 0.2 units

Screen/field equivalent

OSC:TRIG:DEL controls the Trig-Delayfield on the Trigger menu of the SCOPE screen.

:TRIGger:PRETrigger <real number> :TRIGger:PRETrigger?

These commands set/query a pretrigger for each measurement.

This command utilizes the “Real Number Setting Syntax” on page 299, but does not use the :STAT, :DUN, :UNIT, :INCR:MODE, :INCR:DUN, commands.

Syntax

OSC:TRIG:PRET <real>

OSC:TRIG:PRET?

Screen/field equivalent

OSC:TRIG:PRET has no equivalent field on the SCOPE screen.

Chapter 1 293