Agilent Technologies E6380-90073 manual CDANalyzerIS2000TRACePOWerBASicALL?

GPIB Command Dictionary

MEASure subsystem

:CDANalyzer:IS2000:TRACe:POWer[:BASic]:ALL?

IS-2000 only. This query returns the information necessary to recreate the Code Domain trace when making a Power, Fast Power or Fast Power Synchronize measurement. The return consists of 128 four value records for each bar in the trace. The four values for each record are channel number, Power for this channel, a third value that should be ignored and a flag indicating that the next bar should be connected to this bar as part of a wider supplemental channel.

If the selected location is part of a supplemental channel, all the Walsh channels that comprise the supplemental channel and total power for the supplemental channel will be returned.

Syntax

MEAS:CDAN:IS2000:TRAC:POW[:BAS]:ALL?

Screen/field equivalent

There is no equivalent field for this query on the CODE DOMAIN screen. The information is accessible only when a Power, Fast Power, orPower & Noise measurement is being displayed, CD pwr unit is set to Rel from the Reference image on the CODE DOMAIN screen and the CDMA standard is set to “IS-2000”.

:CDANalyzer:IS2000:TRACe:POWer[:BASic][:VALue]?

IS-2000 only. This query returns an array of 128 values representing each channel’s power relative to the specified reference power.

NOTE	The values returned represent the power of individual Walsh channels
	not the supplemental channels of which they may be a part. The power
	of supplemental channels must be read directly from the Marker Lvl
	value on the CODE DOMAIN screen.
	Syntax
	MEAS:CDAN:IS2000:TRAC:POW[:BAS][:VAL]?
	Screen/field equivalent
	MEAS:CDAN:IS2000:TRAC:POW[:BAS][:VAL]? returns values that
	match those displayed for Power, Fast Power, and Power & Noise
	measurements when CD pwr unit is set to Rel from the Reference
	image on the CODE DOMAIN screen when the CDMA standard is set
	to “IS-2000”.

252 Chapter 1