Agilent Technologies E6380-90073 manual 172

GPIB Command Dictionary

CONFigure subsystem

:SPOR9SPORT9SB9SP9:MODem:CONFigure:STRing1

:SPOR9SPORT9SB9SP9:MODem:CONFigure:STRing1?

:SPOR9SPORT9SB9SP9:MODem:CONFigure:STRing2

:SPOR9SPORT9SB9SP9:MODem:CONFigure:STRing2?

:SPOR9SPORT9SB9SP9:MODem:CONFigure:STRing3

:SPOR9SPORT9SB9SP9:MODem:CONFigure:STRing3?

These commands are used to enter the modem configuration strings to be sent when the CONF:SPOR9:MOD:CONF:UPD command is executed. Each string has a maximum of 40 characters.

STR 1 is the initial configuration string sent to the modem when the CONF:SPOR9:MOD:CONF:UPD command is executed. The second line is the second string sent, and the third line is the third string sent. The second and third lines can be left blank.

Syntax

CONF:SPOR9:MOD:CONF:STR1 <string>

CONF:SPOR9:MOD:CONF:STR1?

CONF:SPOR9:MOD:CONF:STR2 <string>

CONF:SPOR9:MOD:CONF:STR2?

CONF:SPOR9:MOD:CONF:STR3 <string>

CONF:SPOR9:MOD:CONF:STR3?

Screen/field equivalent

CONF:SPOR9:MOD:CONF:STR1 controls the first line of the Modem Initialization/Configuration field on the MODEM CONFIGURE screen when the Serial Port field is set to Port 9.

:SPOR9SPORT9SB9SP9:MODem:CONFigure:ECHaracter

:SPOR9SPORT9SB9SP9:MODem:CONFigure:ECHaracter?

This command sets/queries a one-character, non-printable escape character that you use to define your own escape command sequence.

Syntax

CONF:SPOR9:MOD:CONF:ECH <character>

CONF:SPOR9:MOD:CONF:ECH?

Screen/field equivalent

CONF:SPOR9:MOD:CONF:ECH controls the Command Escape Character field on the MODEM CONFIGURE screen when the Serial Port field is set to Port 9.

172 Chapter 1