GPIB Command Dictionary
CANalyzer subsystem
:EVENt:TRIGger <string> :EVENt:TRIGger?
These commands set/query the trigger setting of the CDMA
ANALYZER screen.
Syntax
CAN:EVEN:TRIG ‘27 ms’ ‘20 ms’ ‘80 ms’ ‘2 s’ ‘Delay’ ‘Immed’
CAN:EVEN:TRIG?
Example
CAN:EVEN:TRIG ‘Delay’
!sets the trigger to run after the delay has been set by the CAN:EVEN:TRIG:DEL command.
CAN:EVEN:TRIG ‘2 s’ !sets the trigger to run after 2 seconds
Screen/field equivalent
CAN:EVEN:TRIG sets the Trig Event field of the CDMA ANALYZER screen.
:EVENt:TRIGger:DELay <real number> :EVENt:TRIGger:DELay?
These commands set/query the delay value of the trigger when the :EVEN:TRIG ‘Delay’ command is used. This command utilizes the “Real Number Setting Syntax” on page 299, but does not use the :DUNits, :UNITs, or :STATe commands.
Syntax
CAN:EVEN:TRIG:DEL <real number> !values from 20 μs to 10 s
CAN:EVEN:TRIG:DEL? | !returns the value set |
Screen/field equivalent
CAN:EVEN:TRIG:DEL controls the Trig Event field on the CDMA ANALYZER screen when the Trig Event field is set to Delay.
104 | Chapter 1 |
