
GPIB Command Dictionary
SANalyzer subsystem
:MARKer:DELTa:POSition <real number> :MARKer:DELTa:POSition?
These commands set/query the position of the delta marker on the spectrum analyzer.
This command utilizes the “Real Number Setting Syntax” on page 299, but does not use the :STATe command.
Syntax
SAN:MARK:DELT:POS <real number>
SAN:MARK:DELT:POS?
Screen/field equivalent
SAN:MARK:DELT:POS controls the Position field on the Marker menu of the SPEC ANL screen when the Norm/Delta field is set to Delta.
:MARKer:DELTa:RLEVel
:MARK:DELT:RLEV moves the signal at the delta marker to the reference level position of the spectrum analyzer.
Syntax
SAN:MARK:DELT:RLEV
Screen/field equivalent
SAN:MARK:DELT:RLEV controls the Marker To, Ref Level field on the Marker menu of the SPEC ANL screen when the Norm/Delta field is set to Delta.
Chapter 1 | 317 |