Agilent Technologies E6380-90073 manual NAMPsNTACsDSATSTOP

GPIB Command Dictionary

AFG2ENCoder subsystem

:NAMPsNTACs:DSAT:STOP

This command stops the DSAT if it is being sent. See “:NAMPsNTACs:DSAT:SEND <string> :NAMPsNTACs:DSAT:SEND?” on page 90.

Syntax

AFG2:NAMP:DSAT:STOP

Screen/Field Equivalent

AFG2:NAMP:DSAT:STOP controls the Stop DSAT field on the

SIGNALING ENCODER screen when the Mode field is set to

NAMP-NTAC, and the Channel field is set to Voice.

:NAMPsNTACs[:FOCC]:AM <real number> :NAMPsNTACs[:FOCC]:AM?

This command sets/queries the data level when the AFG2:DEST ‘AM’ command is used. The data level units are %.

This command utilizes the “Real Number Setting Syntax” on page 299.

Syntax

AFG2:NAMP:FOCC:AM

AFG2:NAMP:FOCC:AM?

Screen/field equivalent

AFG2:NAMP[:FOCC]:AM controls the Data Level field when AFGen2 To field is set to AM on the SIGNALING ENCODER screen when the Mode field is set to NAMP-NTAC, and the Channel field is set to Cntl.

Chapter 1 91