GPIB Command Dictionary

AFG2ENCoder subsystem

:NAMPsNTACs[:FOCC]:FILLer:SEND

This command sends the filler information that is entered with the AFG2:FILL:DATA1 and AFG2:FILL:DATA2 commands.

To use this command, AFG2:NAMP:CHAN must be set to ‘Cntl’.

Syntax

AFG2:NAMP[:FOCC]:FILL:SEND

Screen/field equivalent

AFG2:NAMP[:FOCC]:FILL:SEND controls the Send Filler field on the SIGNALING ENCODER screen when the Mode field is set to NAMP-NTAC, and the Channel field is set to Cntl.

:NAMPsNTACs[:FOCC]:FILLer:STOP

This command stops the output of filler data.

To use this command, AFG2:NAMP:CHAN must be set to ‘Cntl’.

Syntax

AFG2:NAMP[:FOCC]:FILL:STOP

Screen/field equivalent

AFG2:NAMP[:FOCC]:FILL:STOP controls the Stop Filler field on the SIGNALING ENCODER screen when the Mode field is set to NAMP-NTAC, and the Channel field is set to Cntl.

94

Chapter 1

Page 94
Image 94
Agilent Technologies E6380-90073 manual NAMPsNTACsFOCCFILLerSEND, NAMPsNTACsFOCCFILLerSTOP