GPIB Command Dictionary
CONFigure subsystem
:NOTChmode <string> :NOTChmode?
These commands set/query the coupling between the AF Generator 1 and a notch filter. The frequency and gain of the notch filter is set by the AFAN:NOTC:GAIN and AFAN:NOTC:FREQ commands.
Syntax
CONF:NOTC ‘AFGen1’ !notch filter switched in
‘None’ | !no notch filter |
CONF:NOTC?
Screen/field equivalent
CONF:NOTC controls the Notch Coup l field of the INSTRUMENT CONFIGURE screen.
:OFLevel:MODE <string> :OFLevel:MODE?
These commands set/query the RF level offset, and is typically used to compensate for path loss between the Test Set and the base station.
Syntax
CONF:OFL:MODE ‘On’
‘Off’
CONF:OFL:MODE?
Screen/field equivalent
CONF:OFL:MODE controls the RF Level Offset field of the
INSTRUMENT CONFIGURE screen.
Chapter 1 | 153 |
