Agilent Technologies E6380-90073 manual Decampstacsdata?

GPIB Command Dictionary

MEASure subsystem

:DEC:AMPSTACS:DATA?

This command queries the decoded data for the voice channel.

Syntax

MEAS:DEC:AMPS:DATA?

Example

MEAS:DEC:AMPS:DATA? !returns a quoted string reporting the decoded data obtained from the voice channel measured by the signaling unit.

For example, the Signaling Decoder reads the voice channel and returns the data as depicted below:

09A15386CDA286604938B128063FD5F8

030078ECDBED872DABF0D308A1718FDB

685461FC0C2130410982E2DAE08C0300

54D0D9B450C08231AFD909BED8C840C0

The information received is the same as that displayed in the Data (hex) field of the SIGNALING DECODER screen.

Screen/field equivalent

MEAS:DEC:AMPS:DATA? reads the Data (hex) measurement field on the SIGNALING DECODER screen when the Mode field is set to AMPS-TACS, and the Channel field is set to Voice.

:DEC:DTMF:LOW:FREQuency:ABSolute <meas cmnd> :DEC:DTMF:LOW:FREQuency:ABSolute?

These command set/query the frequency of the low tone in the DTMF pair. The MEAS:DEC:DTMF:LOW:FREQ:DISP ‘Freq’ command must be used to display the absolute frequency of the low tone.

Syntax

MEAS:DEC:DTMF:LOW:FREQ:ABS

!See “Multiple Real Number Setting Syntax” on page 282

MEAS:DEC:DTMF:LOW:FREQ:ABS? !returns up to 20 real values

Screen/field equivalent

MEAS:DEC:DTMF:LOW:FREQ:ABS? reads the Lo Tone column on the SIGNALING DECODER screen. The Mode field must be set to DTMF and the upper subfield of the Lo Tone field must be set to Freq.

Chapter 1 261