GPIB Command Dictionary
AFG2ENCoder subsystem
:FREQuency <real number> :FREQuency?
This command set/queries the output frequency of AF generator 2.
This command utilizes the “Real Number Setting Syntax” on page 299, but does not use the :STATe command.
Syntax
AFG2:FREQ <real number>
AFG2:FREQ?
Screen/field equivalent
AFG2:FREQ controls the AFGen2 Freq field on the RF GENERATOR screen.
:MODE <string> :MODE?
This command sets the type of signaling encoder.
Syntax
AFG2:MODE ‘Func Gen’
‘DTMF’
AFG2:MODE?
Screen/field equivalent
AFG2:MODE controls the Mode field on the SIGNALING ENCODER screen.
Chapter 1 | 71 |
