Agilent Technologies E6380-90073 manual 188

GPIB Command Dictionary

CONFigure subsystem

:SPOR11SPORT11SB11SP11:MODem:CONNect:TIMeout

:SPOR11SPORT11SB11SP11:MODem:CONNect:TIMeout?

This command sets/queries the number of seconds to wait before aborting a connection attempt. This applies to both answer and originate activities.

Syntax

CONF:SPOR11:MOD:CONN:TIM <integer>

CONF:SPOR11:MOD:CONN:TIM?

Screen/field equivalent

CONF:SPOR11:MOD:CONN:TIM controls the Connection Time-outfield on the MODEM CONFIGURE screen when the Serial Port field is set to Port 11.

:SPOR11SPORT11SB11SP11:MODem:CONNect:HDELay

:SPOR11SPORT11SB11SP11:MODem:CONNect:HDELay?

This command sets/queries the number of seconds to wait before attempting an origination. This applies to the delay prior to attempting a dialback as well as the delay prior to retrying an origination as part of the retry sequence.

Syntax

CONF:SPOR11:MOD:CONN:HDEL <integer>

CONF:SPOR11:MOD:CONN:HDEL?

Screen/field equivalent

CONF:SPOR11:MOD:CONN:HDEL controls the Hold-off Delay field on the MODEM CONFIGURE screen when the Serial Port field is set to Port 11.

188 Chapter 1